CHAPTER 10 ERROR MESSAGES
User’s Manual U15260EJ3V1UM
113
No.
Message
Description
E 750
Writing to INI-File failed.
Writing to the FP4.INI file failed.
E 800
Illegal address
The end address entered in the HEX Editor is lower than
the start address.
E 801
The file cannot be read.
Processing the selected file in the HEX Editor failed.
E 802
No HEX data.
The file format could not be read in the HEX Editor.
E 803
The file cannot be written.
The Windows write-file function failed in the HEX Editor.
E 804
cannot open <file name>
abort
The Windows file-open function failed in the HEX Editor.
E 805
cannot open file
A NULL handle was returned when a file was opened in
the HEX Editor.
E 806
Check sum error.
Continue ?
The HEX Editor detected a faulty checksum. The
checksum will be corrected if continuing.
E 808
Invalid file name.
The specified file could not be found in the HEX Editor.
E 809
<file name> could not be opened.
abort
The Windows file-open function failed in the HEX Editor.
E 900
Unable to open last active PRM/SET file. Using
most recent settings.
The FP4.INI file does not exist or contains invalid entries
for
RecentPrmFile
or
RecentSet-File.
The first
PRM file from sub-directory \PRM will be loaded instead.
E 901
Searching for fp4com.dll failed.
Cannot find Communication DLL fp4com.dll. Reinstall PG-
FP4 software.
E 903
Unable to find any PRM file. Please install PRM
files.
Sub-directory \PRM does not exist or valid PRM file does
not exist in the sub-directory \PRM.
E 907
Download of PRM file failed.
An error occurred while attempting to download a PRM file.
The PRM file may be invalid.
E 908
Download of SET file failed.
An error occurred while attempting to download a SET file.
The SET file may be invalid.
E 910
Checking device name failed.
The parameter file signature differs from the signature read
from the device.
E 911
Checking device end address failed.
The parameter file signature differs from the signature read
from the device.
Содержание PG-FP4
Страница 2: ...User s Manual U15260EJ3V1UM 2 MEMO ...