NEC PG-FP4, Руководство пользователя

Страница: 112 / 117

CHAPTER 10 ERROR MESSAGES
User’s Manual U15260EJ3V1UM
112
No. Message Description
E 210 Line too long.
E 211 Nested repeat is not supported.
E 212 Loop number invalid.
E 213 File too long.
E 214 Statement 'repeat <num. rep.>' missing.
E 215 Command not found
E 216 Download file name missing.
E 217 Opening download file failed.
E 218 Upload file name missing.
E 219 Opening parameter file for upload failed.
E 220 Opening upload file failed.
E 221 Command not allowed in script file.
E 222 Processing a command failed.
Executing a script file might abort with one of these errors.
The contents of the line causing the error are also
displayed.
E 223 Command execution failed. The script syntax was correct and the command has been
sent to the PG-FP4, but the command execution itself
showed an error (e.g. a verify error on the target device).
E 300 Determining download directory failed. The selected directory name in the file download dialog
box is invalid.
E 301 Determining upload directory failed. The selected directory name in the file upload dialog box is
invalid.
E 302 Trying to open USB port failed.
E 303 Trying to connect Programmer failed.
E 304 Trying to open serial port failed.
E 305 Changing the communication speed of the
programmer failed.
E 306 Trying to connect Programmer failed.
E 307 Trying to open USB failed.
E 316 Trying to connect Programmer failed.
The processing after setting the Programmer
Communication Setup dialog box might fail due to one of
these reasons. Please verify proper selection of the
port/speed for the programmer.
E 317 ver command failed. Executing the ver command failed.
E 400 Port is already open. Processing after setting the Programmer Communication
Setup dialog box failed since the port is already open.
Check if programmer ports are set correctly.
E 401 The communication port has not been opened so
far.
Sending a command to the PG-FP4 is only possible after
the communication channel has been opened.
E 500 Evaluating CRC answer failed. The PG-FP4 answered with an unexpected string after
sending the Checksum command.
E 501 Operation failed. Executing a command failed (e.g. a verify error occurred for
a signal from the target device).
E 502 Programmer is not responding. Communication between the PC and the PG-FP4 timed out.
E 503 Receiving failed. Reading the PC port failed.
E 600 Appending information to communication logging
file failed.
Writing data to the communication log file failed.