CHAPTER 2 HARDWARE INSTALLATION
User’s Manual U15260EJ3V1UM
21
The parallel host connector and USB port are located on the left side of the PG-FP4. The parallel host
connector can be used for high-speed downloading of a program as a Centronics interface.
Figure 2-4. PG-FP4 Parallel Host Connector/USB Port Interface
<Left side of PG-FP4>
2.3.3
Target system
The target system must be equipped with a device interface that complies with the target cable specifications. For
details, refer to
CHAPTER 7 CONNECTORS AND CABLES
.
2.3.4
Power supply
The power supply FW7207/15 is equipped with a 2.1
×
55
×
14 DC plug and may be connected to the mains using
one of the AC plugs available in Europe, the UK, the USA and Japan.
For the power supply specifications, refer to
CHAPTER 7 CONNECTORS AND CABLES
.
Caution
Do not use any other AC adapter. Connect only the provided AC adapter to the power supply
jack.
2.3.5
RS-232C host connection
The RS-232C host interface enables communication to the PG-FP4. Windows 95, Windows 98, Windows NT 4.0,
Windows Me, Windows 2000, or Windows XP may be used to operate the PG-FP4, which is connected to the serial
port. The RS-232C data transfer conditions are 9,600 baud, 8 data bits, 1 stop bit, no parity and selectable hardware
handshake.
The baud rate may be selected from 9,600 bps (default), 19,200 bps, 38,400 bps, 57,600 bps or 115,200 bps.
For detailed specifications of the host interface, refer to
CHAPTER 7 CONNECTORS AND CABLES
.
2.3.6
Parallel host connector
The parallel host connector may be configured as follows.
Centronics interface configuration
Program data can be downloaded to the PG-FP4 via a high-speed parallel port from the host system.
For detailed specifications of the parallel interface, refer to
CHAPTER 7 CONNECTORS AND CABLES
.
Содержание PG-FP4
Страница 2: ...User s Manual U15260EJ3V1UM 2 MEMO ...
