NEC PG-FP4, Руководство пользователя

Страница: 20 / 117

CHAPTER 2 HARDWARE INSTALLATION
User’s Manual U15260EJ3V1UM
20
2.3.2 PG-FP4 control panel and connectors
Figure 2-2. PG-FP4 Top View
The control buttons are used in the standalone mode of the PG-FP4.
Next button Proceeds to the next menu item in sequence.
Enter button Selects the item shown in the message display.
Cancel button Cancels the current selection and returns to the previous menu item.
Message display A 16
×
2-character LCD display indicates the operating mode. It is mainly used for the PG-
FP4’s standalone mode.
Status LED The LED shows the PG-FP4 operating status, indicated by the colors green for OK , red for
Error or orange for Operating .
(1) PG-FP4 connectors
The serial host connector, the target interface connector and the power connector are located on the right side
of the PG-FP4.
Figure 2-3. PG-FP4 Target Interface/Power/Serial Host Connectors
<Right side of PG-FP4>
Serial host
connector
Power
connector
Target interface
connector
Parallel host
connector
USB port
Message
display Control
buttons Status LED