NEC PG-FP4, Руководство пользователя

Страница: 51 / 117

CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
User’s Manual U15260EJ3V1UM
51
4.4.2 [Programmer] menu
Clicking the [Programmer] menu displays the following pull-down menu.
This pull-down menu consists of program setting commands.
Figure 4-11. [Programmer] Menu
(1) [Setup Host Connection…] menu
The channel for communicating between the PG-FP4 and PC can be selected and set in this dialog box.
Figure 4-12. <Host Connection> Dialog Box
You may select USB as the communication channel, if USB is supported on your PC.
If “ Serial ” is selected, the port and baud rate may be selected from the drop-down list boxes.
“ Use parallel Download ” can be selected in addition to the serial port. If parallel download is selected, data
download to the PG-FP4 is performed via the selected parallel interface.
Caution The parallel interface cable is not part of the PG-FP4 package.
Check that the LPTx port is not used before using the parallel port.
USB communication is not supported on Windows 95 or Windows NT.
[ OK button]
The software tries to establish a connection between the PG-FP4 and the PC using the selected
communication parameters.
[ Cancel button]
Closes the window without making any changes.