NEC NEFAX 671, Руководство по обслуживанию

Страница: 135 / 323

S-40
7. FOOTER
• This function can be used to set whether or not the reception information (RX data and
time, RX management number, RX page number, Transmitter’s ID) is printed at the bot-
tom of each received document.
• The default setting is “OFF”.
• Attaching footer print:
When Footer is selected ON, it is printed at the end of printable area. 4mm line area from
the end of printable area is kept for printing Footer. It should be attached on Footer area
regardless of image length. If the received image is divided into 2 pages or more, Footer
is printed in the specified location of all the recording sheets of paper printed.
• Image data area:
The received image data is printed on the area except for 12mm from recording paper
size. (No printable area: 8mm (1/3 in) + Footer area: 4mm (1/4 in)) The following table is
the image printable area of each recording paper size due to setting of Footer Print.
8. SELECT TRAY
• This function can be used to select which paper tray can be used to supply paper when
printing received documents or transmission reports. (A paper tray that cannot be used
for supplying paper can also be specified.) This function is only available when an
optional paper tray is installed.
• A non-equipped cassette is not displayed.
When setting value is determined, reception setting of utility menu is indicated. This set-
ting has effect on RX print and Report print.
Setting value Description
ON Add footer
OFF No footer
Paper length
Footer off Footer on
Image data area Image data area Footer area
A4 297 mm 289 mm 285 mm +4 mm (1/4 in)
Letter 279 mm 271 mm 267 mm +4 mm (1/4 in)
Legal 356 mm 348 mm 344 mm +4 mm (1/4 in)
Setting value Description Default
Tray 1 Enable/ Disable Tray 1 Enable
Tray 2 Enable/ Disable Tray 2 Enable