NEC N8100-1573F, Руководство пользователя

Страница: 99 / 394

Configuring Your Server 4-23
IMPORTANT:
„
Notes on selecting Connection Type:
If the destination port is set to "Auto Negotiation", specify "Auto
Negotiation" for management LAN port. To select any other setting,
change connection type of destination port before specifying the
parameter.
„
Notes on performing Clear BMC Configuration
– Executing "Load Setup Defaults" in BIOS SETUP utility does
not restore the default value for settings related to management
LAN of BMC. To restore the default value, you need to execute
Clear BMC Configuration.
– It takes about several tens seconds until initialization completes
after execution of Clear BMC Configuration.
– Executing Clear BMC Configuration also clears settings made in
NEC DianaScope. Before execution, be sure to make backup
copy of setting information of NEC DianaScope.
NOTE:
Executing [Save Custom Defaults/Load Custom Defaults] of
BIOS SETUP does not save the settings you have made in BMC LAN
Configuration menu.
Event Log Configuration Submenu
Option Parameter Description Your Setting
Auto Clear Event
Logs [Disabled]
Enabled If set to "Enabled", logs are
automatically cleared when the error
log area is fulfilled.
Clear All Event
Logs Enter Press Enter and select "Yes" to clear
the system event log.
[ ]: Factory-set
System Event Log Submenu
If you select "System Event Log" on the "Event Log Configuration" of Server menu, the System
Event Log submenu appears.
Use
↑
,
↓
,
+
,
–
,
Home
, or
End
to view the newer or older system event logs recorded.
NOTE:
If a lot of event logs are recorded in the system, it takes about
two minutes at the longest until they are displayed on the screen.