NEC N8100-1573F, Руководство пользователя

Страница: 78 / 394

4-2 Configuring Your Server
SYSTEM BIOS (SETUP)
The SETUP utility is used to change system configuration parameters. This utility is pre-installed in
the flash memory of the server and ready to run.
The server is configured with the correct parameters using the SETUP utility and shipped in the best
conditions. Thus, you do not need to use the SETUP utility in most cases. However, you might wish
to use the SETUP utility in the cases described below.
IMPORTANT:
„
The SETUP utility is intended for system administrator use only.
„
The SETUP utility allows you to set a password. The server is
provided with two levels of password: Supervisor and User. With
the Supervisor password, you can view and change all system
parameters of the SETUP utility. With the User password, system
parameters available for viewing and changing are limited.
„
Do not set any password before installing the OS.
„
The server contains the latest version of the SETUP utility. Dialog
boxes appear on your SETUP utility, thus, may differ from
descriptions in this manual. If you find anything unclear, see the
online help or ask your service representative.
„
Use the Exit menu,
Esc
or
F10
key when exiting the SETUP utility.
Exiting the utility with the POWER switch or reset operation causes
the stored parameters to lose.