NEC N8100-1573F, Руководство пользователя

Страница: 358 / 394

E-22 Installing Windows Server 2003 x64 Editions
Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)
Adapter Fault Tolerance (AFT) is a feature that creates a group containing more than one adapter
and automatically converts the process of the working adapter to the other adapter in the group
when any trouble occurred on that adapter.
Adaptive Load Balancing (ALB) is a feature that creates a group containing more than one adapter
and enhance the through put by operating packet transmission from the server by all the adapters.
This feature includes AFT feature.
IMPORTANT:
„
AFT/ALB setup must be operated after installing the
drivers/PROSet and restarting the system.
„
SFT is not supported.
„
All the adapters specified as a group of Adapter Teaming must exist
on the same LAN. If they are connected to the separate switches,
they will not work normally.
„
The adapters specified as a group of Adaptive Load Balancing
(ALB) can be connected to only Switching Hub.
„
When exchange the mother board or option network card, make sure
to remove the adapter team before exchanges and recreate the
adapter team after exchange complete.
„
Please confirm the port setting of switching hub (L2) matches the
server network adapter Teaming mode.
Setup Teaming
1.
Open the [Device Manager].
2.
Open [Network adapters]
→
[Intel(R) xxx] properties.
3.
Click [Teaming] tab and check the [Team this adapter with other adapters] check box.
Click [New Team].
4.
Fill the name of the team in [Specify a name for the team] and click [Next].
5.
Include the adapter to the team and click [Next].
6.
Select a team type ([Adapter Fault Tolerance]/[Adaptive Load Balancing]).
Click [Next].
7.
Click [Finish].
8.
Click [TEAM: "Team name"] from [Device manager]
→
[Network adapters] to modify
the team. Click [Settings] tab and click [Modify Team] button.