NEC N8100-1573F, Руководство пользователя

Страница: 237 / 394

Troubleshooting 8-15
POST fails to complete:
‰
Is the DIMM board properly installed?
→
The server requires at least two DIMMs for operation.
‰
Is the memory size large?
→
The memory check may take a few seconds if the memory size is large. Wait for a
while.
‰
Did you perform any keyboard or mouse operation immediately after you started the
system?
→
If you perform any keyboard or mouse operation immediately after start-up, POST
may accidentally detect a keyboard controller error and stops proceeding. In such
a case, restart the server again. Do not perform any keyboard or mouse operation
until the BIOS start-up message appears when you restart the server.
‰
Does the server contain appropriate memory boards or PCI devices?
→
Operation of the server with unauthorized devices is not guaranteed.
Fail to access to external devices (or such devices fail to operate):
‰
Are cables properly connected?
→
Make sure that the interface cables and power cord are properly connected. Also
make sure that the cables are connected in the correct order.
‰
Did you install drivers for connected optional devices?
→
Some optional devices require specific device drivers. Refer to the manual that
comes with the device to install its driver.
‰
Is BIOS configuration correct?
→
Most PCI devices generally do not require any change to the configuration, but
some boards do require specific settings. Refer to the manual that comes with the
board for details to make correct settings.
→
Some devices connected to the serial or USB port may require I/O port address or
operation mode settings. Refer to the manual that comes with the board for details
to make correct settings.