NEC N8100-14522F, Руководство пользователя

Страница: 35 / 320

General Description 2-3
SYSTEM CHASSIS
Names and functions of the components are shown below.
Front View
1 POWER LED (green)
This LED turns green when the power is turned on.
2 DISK ACCESS LED (green/amber)
This LED is green during access to the internal hard disk drives.
In RAID system, the LED turns amber when any one of the internal hard disk drives fails, or
blinks during rebuild.
3 ACT/LINK LED (green)
This LED is on while the system is connected to the network.
4 UID (Unit ID) LED (blue)
This LED goes on when the UID switch is pressed. (The LED also goes on or blinks when
software issues a command.)
5 STATUS LED (green/amber) (on the front panel)
This LED indicates the server status. The LED is green during normal operation. The LED
blinks amber or turns off when the server enters the abnormal state.
6 Serial port B (COM B) connector
The connector is used to connect the server to a device with the serial interface.
7 USB connector
These connectors are used to connect the server to a device with the USB interface.
8 Reset switch
Press this switch to reset the system. In normal operation, this switch is not used.
6
7
1 3 -1 4 6
9
10
2 3 -2 5
11
12 -1 13 12 -2 13 12 -3 13