Chapter 3
Setting Up a Design
3-16
ni.com
7.
Click checkboxes beside the desired nets in the
Assign Nets
list and
click
Apply
to add them to the group.
Note
You cannot assign a net to more than one group. Therefore, nets that are already
assigned to another bus group do not appear in the
Assign Nets
list.
8.
Click
OK
to close the
Edit Groups
dialog box.
Complete the following steps to edit a bus group:
1.
Select
Tools»Group Editor
to display the
Edit Groups
dialog box.
2.
Select the
Bus Groups
tab.
3.
Highlight the desired group in the
Groups
list.
4.
Change the net assignments as desired and click
Apply
.
Complete the following steps to delete a group:
1.
Select
Tools»Group Editor
to display the
Edit Groups
dialog box.
2.
Select the
Bus Groups
tab.
3.
Highlight the desired group in the
Groups
list and click
Delete
.
