National Instruments Graphical User Interface Ultiboard, Руководство пользователя

Страница: 255 / 281

Appendix A Menus and Commands
NI Ultiboard User Manual A-14 ni.com
Place»Automatic Test Points
Use to automatically place a test point on each net on your design. Refer to
the
Placing Automatic Test Points section of Chapter 7, Autorouting and
Autoplacement , for more information.
Place»Unplace Parts
Use to unplace all non-locked parts. Refer to the Unplacing Parts section
of Chapter 4, Working with Parts , for more information.
Place»Comment
Places a comment on the design. Refer to the Placing a Comment section
of Chapter 8, Preparing for Manufacturing/Assembly , for more
information.
Design Menu
The subjects in this section describe the commands found in the Design
menu.
Design»Netlist & DRC Check
Use to run the design rules and netlist check utility. Results are displayed
in the
DRC tab of the Spreadsheet View . Refer to the Spreadsheet View:
DRC Tab section of Chapter 1, User Interface , for more information.
Depending on your settings in the PCB Design tab of the Preferences
dialog box, this utility may run automatically. You can use this command
to force a check of the board's integrity, and may want to use it prior to
saving or exporting the design.
Design»Connectivity Check
Runs a connectivity check on the design.
When this command is selected, the Select a Net dialog box displays.
Select the net on which you wish to run the connectivity check and click
OK .
Results are displayed in the Results tab of the Spreadsheet View . Refer to
the Spreadsheet View: Results Tab section of Chapter 1, User Interface , for
more information.