Chapter 5
Working with Traces and Copper
©
National Instruments Corporation
5-29
5.
Select the net to use for the shield in the
Shield net
area:
•
Use Net Settings
—Select to use the shield set in the
Spreadsheet
View
(also set in the
Net edit
dialog box).
•
GND
—Select to activate the drop-down list, where you can pick
the net to use for the shield.
6.
In the
On DRC Error
area, select the action to take when a DRC error
occurs.
7.
In the
On Other Failures
area, select the action to take when other
errors occur.
8.
In the
Nets
area, select the nets you wish to shield.
9.
In the
Layers
area, select the layers on which you wish to place the
shielding.
10. Click
OK
. You are returned to the
Net Shielding
dialog box.
11. Click
OK
.
The shielding appears as illustrated below:
12. Results appear in the
Results
tab of the
Spreadsheet View
. You may
click on an error to go to the problem area.
