National Instruments Graphical User Interface Ultiboard, Руководство пользователя

Страница: 152 / 281

Chapter 5 Working with Traces and Copper
NI Ultiboard User Manual 5-8 ni.com
4. Optionally, click on one of the following checkboxes in the Advanced
options area and then click the Options button when it becomes
active:
• Net Group —Displays the Select Groups dialog box where you
select the net groups to which you wish to apply the Keep-in/out.
• Part Height —Displays the Part Height Ranges dialog box
where you enter the height of parts to which you wish the
Keep-in/out area to apply.
• Part Group —Displays the Select Groups dialog box where you
select the part groups to which you wish to apply the Keep-in/out
area.
5. Click OK in the Keep-in/Keep-out Properties dialog box.
If no Advanced options are set:
• A DRC error is reported if an object is moved outside of a Keep-in
area.
• A DRC error is reported if an object is inside a Keep-out area.
• If there are multipleKeep-ins or Keep-outs, the objects may be divided
amongst the different areas at your discretion. Multiple areas then
behave as a single disjointed area.
If any Advanced options are set:
• A DRC error is reported if an object is moved outside of a Keep-in
area.
• A DRC error is reported if an object is inside a Keep-out area.