National Flooring Equipment ROGUE, Руководство по эксплуатации и обслуживанию

Страница: 33 / 84

407170_ROGUE_RevA
TRANSPORTING THE MACHINE
33 33
1. Make sure transport wheels are installed.
2. Move machine onto liftgate.
3.
Engage wheels and chock wheels to stabilize machine
on liftgate.
4. Move machine into truck.
5. Before tying down machine, engage wheels and install
empty blade holder for stability.
6. Tie down the machine using proper tie-down locations.
IMPORTANT:
● Make sure the load capacity of the liftgate is greater than
the weight of the operator and machine.
● Machine weight is shown in “MACHINE SPECIFICA-
TIONS” section and on serial number label.
● Make sure weights are properly secured to the machine.
● Use the transport wheels when loading and unloading.
● Engage wheels and use wheel chocks to stabilize ma -
chine on liftgate.
● Before tying down machine, engage wheels and install
empty blade holder for stability.
● Use appropriate tie-down hardware to secure machine.
● Always inspect the tie-down hardware before each use.
Do not use if worn or damaged.
● Use only proper tie-down locations. Do not attach the
tie-down hardware to handle, weights, blade holder or
tooling holder. Weights and handle could detach causing
injury. The machine could be damaged.
● Load disengagement can cause severe injury or prop-
erty damage. Always make sure tie-down hardware is
properly connected.
● Make sure all attachments are properly secured during
transport.
● Follow your company’s safety guidelines to avoid injury.
To avoid personal injury:
● Instructions for safe transporting using a vehicle
equipped with a power liftgate are described
below. Read these instructions carefully before
transporting. Personnel in proximity of the ma-
chine must wear adequate safety equipment.
WARNING
VEHICLE WITH POWER LIFTGATE
Using a truck or van equipped with a power liftgate is the
recommended way of transporting the machine by vehicle.
Transporting with power liftgate
Tie-down locations