National Flooring Equipment ROGUE, Руководство по эксплуатации и обслуживанию

Страница: 32 / 84

407170_ROGUE_RevA
TRANSPORTING THE MACHINE
32 32
1. Position the slide weights rearward.
2. Slowly tilt the machine back using the kickplate.
3. Block up machine. Place block under linkage.
4. Insert the transport wheels into the tooling holder. Make
sure the transport wheels are fully engaged and secure.
5. For better maneuverability, adjust the blade angle so the
transport wheels bracket is parallel to the floor.
NOTE:
● When not in use, store transport wheels on the handle
orientated as shown.
To avoid personal injury:
● Before tilting machine back, position the slide
weights rearward to make tilting easier.
● Always block the front of the machine to prevent
the machine from falling forward unexpectedly.
WARNING
Good maneuverability--bracket parallel to floor.
Poor maneuverability--bracket NOT parallel to floor.
Proper orientation for transport wheels in stowed position
Installing transport wheels.
TRANSPORT WHEELS
Transport wheels are used to move the machine around the
jobsite or for loading the machine onto a vehicle. They allow
for easier movement and provide stability.