National Flooring Equipment ROGUE, Руководство по эксплуатации и обслуживанию

Страница: 13 / 84

407170_ROGUE_RevA
SAFETY
13 13
21. Machine is only to be used indoors. Do not use in wet
environments.
● Do not operate near standing water.
● Do not use to scrape waterlogged carpet.
22. Do not block the machine’s air flow. Blocking ventilation
slots or air flow could result in damage to the machine.
Leave space for air to flow freely during operation.
23. If abnormal noise or vibration occurs, turn off the ma -
chine immediately.
24. Do not force equipment. Equipment will perform best at
the rate for which it was designed. Excessive force only
causes operator fatigue, increased wear and reduced
control.
10. Always check the surrounding area for any possible con-
ditions that could create a dangerous situation.
● Operator should be aware of who is around them and
their proximity. Never allow people to approach the
vicinity of the machine while the machine is running.
● Bystanders should stay a minimum of 3 ft away from
the machine during operation.
● Keep children away from the machine and work area
at all times.
● Be aware of blind spots to the rear and always check
behind you before backing up.
● Provide barriers or shields as needed to protect oth-
ers in the work area from flying debris and machine
operation.
11. Electrical cords create a tripping hazard. Be careful not
to trip over the extension cord while operating the ma-
chine.
12. Never allow people to ride on the machine.
13.
Never step on the debris deflector during operation, as
loss of balance and personal injury could occur.
14. Avoid leaning forward over the handle during operation.
If machine is operated in reverse, drive wheel could roll
over operator’s foot causing possible injury.
15. Never lean on the handle. Putting weight onto machine
could damage the handle and cause operator to lose
balance.
16. Avoid driving the machine over any obstacles which
could cause a loss of control.
17. Use caution when operating the machine on inclines or
uneven surfaces.
● The weight of the machine may become distributed
differently if on an uneven surface. Too much of an
angle could cause the machine to roll unexpectedly
or roll over.
● Max. working grade (scraping applications): 5%
● Max. transportation grade (ramp use): 36%
18. Do not use on largely uneven surfaces.
19. Use caution when operating on slippery surfaces.
20. Avoid use in dangerous environments. Do not use in the
presence of explosive atmospheres (gaseous fumes,
dust or flammable materials). Remove materials or de -
bris that may be ignited by sparks.
TRANSPORTING THE MACHINE
1. Dress properly and wear adequate safety equipment
when transporting the machine. All personnel in the
proximity of the machine must wear eye protection, ear
protection, safety shoes, safety gloves, hard hat, high
visibility safety vest and dust mask. Do not wear loose
clothing as it could get caught in moving parts and cause
injury.
2. The machine is very heavy! Machine weight is shown
in “MACHINE SPECIFICATIONS” section and on serial
number label.
3. Never attempt to manually lift the machine. Hands could
slip off causing serious injury.
4. Never lift machine by the handle, weights, blade holder
or tooling holder. Weights and handle could detach caus-
ing injury. The machine could be damaged.
5. Use only proper lifting points and tie-down locations.
6. See “TRANSPORTING THE MACHINE” section for de-
tailed safety instructions.