Manual PD4-C (USB)
3 Safety instructions and warnings
Version: 1.4.1 / 22.07.2016 / FIR-v1626
9
3 Safety instructions and warnings
3.1 Important information
This technical manual must be carefully read before installation and commissioning of the motor
controller.
Nanotec
®
reserves the right to make technical alterations and further develop hardware and software in
the interests of its customers to improve the function of this product without prior notice.
This manual was created with due care. It is exclusively intended as a technical description of the
product and as commissioning instructions. The warranty is exclusively for repair or replacement of
defective equipment, according to our general terms and conditions; liability for subsequent damage or
errors is excluded. Applicable standards and regulations must be complied with during installation of
the device.
Nanotec produces component parts that are deployed in a variety of industrial applications. The
selection and application of Nanotec products is the responsibility of the system constructor or end user
(see Personnel qualifications). Nanotec accepts no responsibility for the integration of the products in
the end system.
Under no circumstances may a Nanotec product be integrated as the sole safety control in a product
or construction. All positioning controls without exception must be designed so that errors are
detected dynamically and fail- safe under all circumstances. All products which contain a component
part manufactured by Nanotec must show appropriate warning notices and instructions for a safe
application and safe operation on delivery to the end user. All warning notices provided by Nanotec
must be immediately passed on to the end user.
Nanotec only accepts an express warranty for the quality of its own products in agreement with the
standards and specifications as they appear in the Nanotec manual. ALL OTHER IMPLICIT and
EXPLICIT WARRANTIES ARE EXCLUDED. Nanotec assumes no liability for injuries, product damage,
loss or claims that arise through incorrect application of the products.
Nanotec does not take over any responsibilities for results caused by any unauthorized product
changes. Nanotec does not take over any liabilities for damages or disruptions caused by any
unauthorized product changes.
To submit criticism, proposals and suggestions for improvement, please contact the above address or
send an email to: [email protected]
3.2 Personnel qualifications
Work on and with this product may only be carried out by skilled workers
•
who are familiar with and have understood the contents of this manual
•
who have completed a training course or have the corresponding experience to be able to estimate,
predict, or identify any dangers that may arise from using the motor controller
•
who are familiar with all applicable standards, legal provisions, and accident-prevention regulations
that have to be complied with when working on and with the product
•
who are able to ensure personal safety when using the motor controller in an overall system
Operation may only be carried out when the specified cables and corresponding accessories are used.
Use only original accessories and original spare parts.
