MRC MIA-LA, Руководство по эксплуатации

Страница: 60 / 92

Ultrasonic milkanalyser
Operation manual 60/92
Display Time
Adjust Time
Adjust Date
Exit
Using these menus, the operator has the possibility to show on the display
the current time and date, and if necessary
– to adjust them.
The time is shown in the format:
hh:mm:ss
dd:mm:yy
Exit
where:
hh - the current hour
mm - current minutes
ss - current seconds
dd - current day
mm - current month
yy
- current year
9.11. USB Flash-drive (pen drive) (option).
This option allows connecting standard USB Flash Drive (Pen Drive)
towards the
MIA
. Its usage allows automaticall
y (without operator’s
interfere) creating total archive of all measurements, made with the
analyzer. Actions necessary for switching on/off the USB Flash Drive are
analogous to the same when working with PC. After USB Flash Drive
is inserted in the coupling at the front panel of the analyzer,
MIA
starts
writing there the results from each measurement. If you do not need to
make an archive, then simply remove the flash drive from the analyser.
As when working in PC, when the flash reads/writes its LED blinks. I this
case wait for the Led stop blinking and then remove the flash drive from the
analyser.
Data, collected from measurements, are saved in MS Excel file. The name
of the file is formed by the date, when the measurement is made (in
case
there’s embedded clock option). For example – 111213.xls means,
that the file was created in year 2011(last two digits from the year),
month 12
–