Monaco 2008 Knight, Руководство пользователя

Страница: 96 / 246

applIances —
92
2 0 0 8 K n I G h t
WaSHer/Dryer (optIonal)
The automatic
washer/dryer is front
loading with an extra
large door opening
for easier access.
Several wash and dry
programs are available
along with variable
water temperature
settings.
The washer/dryer operates on 120 Volt
AC from shore power or the generator.
The washer/dryer uses about 12 to 20
gallons of water per wash cycle.
CAUTION
It is highly recommended that the
motorhome is hooked to shore services
when using the washing machine due
to limited fresh water supply and
limited grey tank capacity. On certain
model floor plans and options, the
washer may drain into the black tank.
INFORMATION
Refer to the washer/dryer OEM
manual for detailed operating
instructions.
WARNING
Open a window or vent while
operating the dryer. The washer/dryer
can create negative air pressure inside
the motorhome that can accumulate
Carbon Monoxide or LP-Gas while
operating fuel-burning appliances.


CAUTION
DO NOT use the washer/dryer while
traveling. Suspension movement,
combined with the weight of the drum
while in the wash cycle, can damage
the internal components of the washer/
dryer.
Test Procedure
Before using the washer, after winter storage
or a long period of non-use, conduct a simple
test procedure to verify that all the hardware and
electronic components are functioning. Wipe the
interior and exterior of the washer dryer with a
damp cloth to remove accumulated dust.
NOTE
Perform this test before putting the
washer/dryer in use or after the winter
months. This will clear the water lines
and drum of winterization antifreeze.
Operation
Test Procedure Requirements:
Secure water supply lines and open fresh
water valves.
Hook to city water or turn on the water
pump.
Hook to shore power or start
the generator.



To Conduct the Test Procedure:
1. Set the selector knob to Reset.
2. Set the Dry Timer knob to 30 minutes.
Push the On/Off button to
ON
. Wait 5
seconds. The Auto Dry light should be
on and the Status light flashes fast then
slow.
3. Set the selector knob to a wash cycle.
Set Wash Temp knob to Warm. Water
should be flowing into washer and
drum should rotate both directions.
4. Set the selector knob to Reset. Wait 5
seconds.
5. Set the selector knob to Spin. Water
drains and drum rotation increase.
6. Set the selector knob to Reset. Wait 5
seconds.
7. Set the selector knob to Dry. Dryer fan
begins and drum rotates both
directions.
8. Set the selector knob to Reset. Wait 5
seconds.
9. Set the Dry Time knob to zero. The
Auto Dry light should go off.
10. The door will unlock in 2 minutes or
less. The Status light flashes fast then
slow. The door should now open.
031017g
031017e