exterIor & InterIor care — 3
2
2 0 0 8 K n I G h t
Maple -
Dilute one part iodine with one part
denatured alcohol.
Commercial scratch removers, or stick wax to
match the wood finish, can also be used. After
the scratch has been hidden, polish or wax the
entire area. Deep scratches should be repaired
and finished by a professional.
Dents:
Small dents may be repaired by using steam.
To raise a small dent, place a damp cloth over
the area and hold a medium-hot iron on it. The
steam causes the wood fibers to swell back into
place. It may be necessary to repeat this process
until the dented area is level with the surface.
Allow the area to dry.
Restoring the clear finish:
The finished surface on the wood is a clear
lacquer coating. The lacquer finish can be
repaired should the finish become dulled or
scratched. Scratches extending into the wood
will require wood repair by filling the damaged
area. If there is light damage, the wood can be
steamed to bring the wood surface level.
Lacquer finish sheen can be restored by
carefully using 0000 steel wool or equivalent.
Sand damaged lacquer with fine sandpaper. Once
the scratched surface is smooth, apply a clear
lacquer coating using an aerosol. Lacquer can
be applied by cloth or brush, but best results are
obtained from an aerosol. If necessary, use 0000
steel wool or equivalent to bring out the luster
and smooth overspray.
CAUTION
Use top coats and finishes in accordance
with the manufacture’s safety
instructions. Use only in well ventilated
areas with proper respiratory filters and
masks.
Re-staining the wood:
If bare wood is visible at the bottom of the
scratch, the wood will need to be re-stained.
To remove damaged varnish, lightly roughen a
small area around the scratch with sandpaper,
steel wool or synthetic steel wool. Find a stain
that is a shade lighter than the wood finish. Stain
the bare wood with a very small amount of stain
on a rag, brush or cotton swab. If the color is too
light, apply additional coats. Rub away excess
stain with a dry rag. If the wood becomes too
dark, use a rag moistened in mineral spirits to
lighten the wood. Select a lighter color stain and
continue.
Several companies have simplified this repair
process by designing oil-based wood stain into
marker-like containers to rub on to the scratch.
Torn and scratched wood fibers will absorb stain
and darken quickly. Start with a stain color that
is lighter than the original finish. A second coat
can always be applied if the color of the first
coat is too light. Once the color is blended, patch
the clear finish as described above and apply a
wipe-on finish.
coUntertopS
Solid Surface
Routine Care:
The motorhome solid surface countertops and
sinks have a matte/satin finish. Soapy water or
ammonia-based cleaners will remove most dirt
and stains from all tops and bowls. Individual
techniques may be used to remove different
stains. Follow the recommendations below.
Cleaning the Countertops:
Most dirt and stains:
Use soapy water
or ammonia-based cleaner.
Water marks:
Wipe with damp cloth
and towel dry.
Difficult stains:
Use soft scrub and a
grey
Scotchbrite
Pad.
Disinfecting:
Occasionally wipe surface
with diluted household bleach (one part
water and one part bleach).
Cleaning the Solid Surfaces Sink:
Occasionally clean by using
Soft Scrub Liquid
Cleanser
and a grey
Scotchbrite
pad. Scrub the
sink, rinse and towel dry.
Removing Cuts and Scratches:
Solid Surface countertops are completely
renewable. Use the following instructions to
remove minor cuts and scratches.
Sand area starting with 180 grit
sandpaper, working your way up to 2000
grit or until blemish is gone and renewed
finish is achieved.
Never sand in one small area. Feather out
lightly at each increase in sandpaper grit
to blend restoration.
Содержание 2008 Knight
