Monaco 2008 Knight, Руководство пользователя

Страница: 56 / 246

exterIor & InterIor care — 3
2
2 0 0 8 K n I G h t
WARNING
DO NOT use a flammable solution to
coat the inside of the rim. This can lead
to an explosion during tire inflation or in
subsequent operation of the motorhome.
Outside:
The coated surface of the wheels should
be treated the same as the paint finish on the
motorhome. Road soils, grime and brake dust
trap moisture which can cause corrosion over a
period of time.
1. Frequently clean using high-pressure
water.
2. Wash with a 100% cotton cloth and
a mild soap solution (dish soap or
carwash soap is recommended).
3. Rinse all remaining soap residue with
high-pressure water and wipe the
surface dry using a 100% cotton cloth
to avoid water spots.
4. A secondary hand washing may be
required to remove some stubborn road
films.
5. Carnauba wax can be applied to help
protect the finish.
NOTE
Allow heated wheels that are extremely
hot to cool before spraying with cold
water.
CAUTION
DO NOT use the following items on
coated aluminum wheels:
Polishes (unless marked “safe for clear
coat” or Alcoa Aluminum Care).
Synthetic cleaning pads, wire or abrasive
brushes, steel wool or scouring pads
(these can mar or scratch the finish).
Strong detergents, alkaline or acidic
cleaners, acids or lye-based chemical
products or solvents.
CAUTION
Rinse aluminum wheels using high-
pressure water to remove debris
from the surface before washing. DO
NOT scrub. Rubbing debris against
the surface of the wheel can result in
scratches. DO NOT allow soap solution
to dry on the finish of the wheel as
spotting will occur.
INFORMATION
Instructions for cleaning, handling and
minor scratch repair to the coating can
be found in Accuride service bulletin
2.0037 Rev 1. Contact Accuride at 1-800-
823-8332 for futher information.
Bright Metal
All chrome and stainless steel should be
washed and cleaned each time the motorhome is
washed. Use only automotive approved non-
abrasive cleaners and polishes on exterior bright
work.
DO NOT
use rubbing compounds.
DO
NOT use abrasive cleaners or compounds to
clean the mirrors.



NOTE
When using chemicals to remove road
tars, use only automotive products that
are recommended for painted surfaces
and fiberglass. Observe the warning
recommendations and directions printed
on the container of any agent being
used.
exterIor maIntenance
The motorhome is exposed to extreme
temperatures, humidity, ultraviolet rays, rain
and other environmental conditions. While in
operation the motorhome is subject to twisting
and flexing caused by rough roads, potholes
and winding mountain roads. Maintenance is
necessary not only to keep the exterior looking
nice, but also to keep it in proper working order.
Fiberglass
Inspect
the fiberglass exterior. Periodic
inspection
may reveal that flexing of the
fiberglass exterior has created imperfections
in the surface commonly known as “spider” or
“hairline” cracks. A crack that has opened up
to reveal the cloth weave threatens the integrity
of the fiberglass. If the exterior exhibits signs
of damage, prevent moisture penetration,
particularly in freezing climates. Cover the area
using plastic sheeting and/or tape, and have the
damaged fiberglass repaired as soon as possible.