MKS 651D Series, Руководство пользователя, Страница: 99 / 162

Chapter Five: Remote RS-232 Operation Setup Messages
87
How To Set the Analog Set Point Range
The command [ A value ] sets the full scale voltage range for the analog set point, where:
value : 0 = 5 Volts (initial)
1 = 10 Volts
To query the voltage range of the analog set point, issue the request:
R 24
The controller responds with the message [
A range
], where:
value
: 0 = 5 Volts
1 = 10 Volts
An example response, if the analog set point has a full scale range of 5 Volts, is:
A 0
To change the full scale range of the analog set point to 10 Volts, enter:
A 1
Note
You can operate the 651 controller at a different full scale input, for
example, 4.5 V, by recalibrating the full scale of the analog set point.
Refer to
How To Calibrate the Full Scale of the Analog Set Point , for
more information.