MKS 651D Series, Руководство пользователя, Страница: 147 / 162

Appendix C: Initial Settings
135
Appendix C: Initial Settings
Your 651 controller is shipped with the initial configuration settings listed alphabetically in Table
20. Since the 651 unit stores most of the settings in non-volatile RAM, the values are not default
settings. Values stored in non-volatile RAM are saved when the power is turned off. When the
power is restored, the 651 unit “remembers” the latest configuration, not the initial configuration.
Initial Settings
Parameter Initial Setting Other
Analog Set Point None None
Analog Set Point Full Scale
Range 5 V 10 V
Baud Rate 9600 300 19200
1200 38400
2400 57600
4800 115200
End-of-Line Delimiter CRLF CR
Gain Values
Gain
Phase None
None 0 to 100%
0 to 100%
Parity / Data Bits None / 8 Even / 7
Pressure Control Mode PID None
Pressure Units Torr mTorr
mBar
µBar
kPa
Pa
cmH
2
O
inH
2
O
Sensor Ranges (units) 10 and 1,000 Torr mBar
10000
5000
1000
500
50
10
5
2
1
0.5
0.2
0.1
1.33
2.66
13.33
133.3
1333
6666
13332
Table 20: Initial Settings (Continued on next page)