MKN FlexiChef FCEKMP12 Series, Руководство по установке

Страница: 28 / 68

Setting up the unit
28 Installation instructions
5.4 Setting up the unit on the base
WARNING
Risk of injury from falling unit
• Secure the unit adequately when lifting and lowering.
• Do not linger under the unit when lifted.
The equipment legs are enclosed with the unit and must be attached
before setting up the unit.
a
b
c
a
b
a
A
Image: Setting up the unit on the base
a Equipment leg b Connection area
A Adjustment dimension
Before setting it up, measure the base for differences in height.
Before setting up the unit, first preset the rear equipment leg in
the narrow side arm and use it as a reference point.
Subsequent adjustment with the special key is not possible in
the narrow side arm.
Requirement The floor must be capable of taking the weight of the unit
The transport securing device is present
1. Use appropriate lifting gear to raise the unit.
2. If the base is not level, identify the highest area of the base and
start the setting-up there.
3. Screw the equipment leg into the position provided and set it to
the adjustment dimension of ≈17 mm.
The adjustment dimension is only used for unscrewing the
transport securing device
4. Set up the unit in accordance with the planning drawing and with
the transport securing device attached.
5. Remove the transport securing device (see "Removing transport
securing device").
10000008311AINBEB