MKN FlexiChef FCEKMP12 Series, Руководство по установке

Страница: 27 / 68

Setting up the unit
27 Installation instructions
5.3 Placing the unit on the equipment legs
WARNING
Risk of injury from falling unit
• Secure the unit adequately when lifting and lowering.
• Do not linger under the unit when lifted.
ATTENTION
Physical damage from equipment legs shearing off
Equipment legs can shear off, if the unit is pushed.
•
Do not push the unit.
• Raise the unit before moving it.
ATTENTION
Instability if the equipment legs are screwed out too far
Stability no longer assured
The unit may tip over
•
Only set the equipment legs in the adjustment range of 150
mm - 200 mm.
The equipment legs are enclosed with the unit and must be attached
before setting up the unit.
a
a
b
Image: Equipment leg for setting up on legs
Requirement The floor must be capable of taking the weight of the unit
The transport securing device is present
1. Use appropriate lifting gear to raise the unit.
2. Screw the equipment leg completely into the position provided and
tighten it only hand-tight.
3. Set up the unit in accordance with the planning drawing and with
the transport securing device attached.
4. Remove the transport securing device (see "Removing transport
securing device").
10000008311AINBEB