MKN FlexiChef FCEKMP12 Series, Руководство по установке

Страница: 32 / 68

Setting up the unit
32 Installation instructions
5.6.3 Checking alignment
Image: Checking alignment
Requirement Unit is aligned
1. Measure the diagonals between the arms under the pan and
compare them.
2. If there is a difference of more than 5 mm mm, correct the
alignment.
5.7 Attaching the cover plate
A cover plate is available for easy cleaning under the unit.
a
b
a
c
Image: Cover plate for placement of pad and legs
a Screw c Sealant
b Cover plate
1. As can be seen in the figure, push the cover plate into the groove
of the rear panel as far as the stop.
2. Insert the screws and tighten them firmly.
If the nuts are covered by the base, do not use the screws,
since the cover plate is resting on the base.
3. Check the alignment of the unit (see "Aligning the unit").
4. Seal the joint gap to the unit with sealant.
5. Before operating the unit, observe the drying time of the sealant.
10000008311AINBEB