MKN FlexiChef FCEKMP12 Series, Руководство по установке

Страница: 22 / 68

Setting up the unit
22 Installation instructions
5.2.2 Removing and attaching the cover of the control arm
A B
a
b
Image: Removing the cover of the control arm
a Rear lock b Front lock
Removing the cover of the control arm
Requirement Unit is disconnected
Front panel of the control arm removed
1. Lay the anti-scratch protection on the lid.
2. Open the rear lock and fix it in position.
To do this, pull the lock forwards then press it downwards until
it engages.
3. Open the front lock and fix it in position.
To do this, press the lock inwards then press it downwards
until it engages.
4. Carefully lift the cover upwards.
Do not apply any force, so that connected lines are not
damaged.
5. Lay the cover down on the lid with the sides reversed.
Attaching the cover of the control arm
Requirement Front panel of the control arm removed
1. Release the catch and close the rear lock.
To do this, pull the rear lock forwards then press it upwards
and release it.
2. Release the catch and close the front lock.
To do this, press the front lock forwards then press it upwards
and release it.
3. Carefully place the cover on from above until it engages.
Do not squash any connected lines.
Do not apply any force.
Make sure that the side wall is positioned correctly.
Check that the locks are closed.
10000008311AINBEB