background image

INSTALLATION INSTRUCTIONS

30" (76.2 CM) FREESTANDING GAS RANGES

Table of Contents

RANGE SAFETY...................................................................................2

INSTALLATION REQUIREMENTS .....................................................3

Tools and Parts..................................................................................3
Location Requirements .....................................................................4
Electrical Requirements.....................................................................5
Gas Supply Requirements ................................................................6

INSTALLATION INSTRUCTIONS .......................................................7

Unpack Range...................................................................................7
Install Anti-Tip Bracket ......................................................................7
Make Gas Connection.......................................................................8
Verify Anti-Tip Bracket Is Installed and Engaged .............................9
Level Range .....................................................................................10
Electronic Ignition System...............................................................10
Complete Installation.......................................................................12

GAS CONVERSIONS .........................................................................12

LP Gas Conversion..........................................................................12
Complete Conversion......................................................................14
Natural Gas Conversion ..................................................................14
Complete Conversion......................................................................16

W10620413C

IMPORTANT:

 

Save for local inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.

Содержание WFG320M0B

















Отзывы: