Mitsubishi NZ2GF2B-60DA4, Руководство пользователя

Страница: 122 / 174

120
0130
H
Moderate error
Non-volatile
memory data
error
(parameter)
The parameter data stored in the
non-volatile memory are
abnormal.
• Set no request (0), request (1), and no
request (0) in Parameter information clear
request (address: 1002H) and set the
parameters of the non-volatile memory to
default.
• Set the parameters again.
• Take measures against noise with a
shielded cable for connection.
• If this error persists, the module may be in
failure. Please consult your local Mitsubishi
representative.
0140
H
Minor error
Non-volatile
memory data
error (error
history)
The error history data stored in
the non-volatile memory are
abnormal.
• The module will be automatically recovered
immediately after the error occurs. Note
that the error history of the errors that have
occurred will be lost.
• Take measures against noise with a
shielded cable for connection.
• If this error persists, the module may be in
failure. Please consult your local Mitsubishi
representative.
0160
H
Minor error
Remote buffer
memory
access error
A buffer memory area other than
the remote buffer memory areas
has been accessed using the
REMFR/REMTO instruction.
Correct the setting data of the
REMFR/REMTO instruction to access the
remote buffer memory.
017
H
Moderate error
External signal
assignment
setting error
An address other than those
assigned to the extension I/O
module for the external signal
assignment function has been
set.
represents one of the following
error types.
2: Alert output function
3: Error output
4: Warning output
Set an address that has been assigned to the
extension I/O module for the external signal
assignment function.
0180
H
Moderate error
Same address
for the external
signal
assignment
function
The same address has been set
in multiple extension output
modules for the external signal
assignment function.
Set a unique address.
040 †
H
*1
Moderate error
Offset/gain
setting value
inverted
The user range setting value has
been set to a value where the
offset value is equal to or greater
than the gain value.
† represents the channel
number where an error has
occurred.
Correct the setting so that the offset value is
smaller than the gain value.
060 †
H
*1
Minor error
Digital value
outside the
range
The value set in CH † Digital
value (RWw2 to RWw5) is
outside the range.
† represents the channel
number where an error has
occurred.
Set the value of CH † Digital value (RWw2 to
RWw5) within the allowable range.
Error code
(hexadecimal)
Classification Error name Description and cause Action