Mitsubishi LE-30CTN, Инструкция по эксплуатации

Страница: 22 / 64

3.2 Method of change screen
3. Screen system and method of change screen
20
2) To switch the screen by selecting an item number
• Set an item number using the value dial(16).
• If the selected item has only one screen, pressing the
T
or
S
keys will return the system to the adjustment/
setting item selection screen.
• If the selected item has two or more screens, use the T and S keys to switch the screen. If the uppermost
screen is displayed, pressing the S keys will return the system to the adjustment/setting item selection
screen. If the lowermost screen is displayed, pressing the
T
key will return the system to the adjustment/
setting item selection screen.
• If a screen has two or more items, pressing the T or S key will move the under-cursor to the next or
previous item. However, if the cursor is at the uppermost item, pressing the
S
key will return the system to
the adjustment/setting item selection screen. If the cursor is at the lowermost item, pressing the
T
key will
return the system to the adjustment/setting item selection screen.
20:
Full-scale tension
value, decimal
point setting
21:
Tension indication
filter time constant
setting
30:
Tension output
filter time constant
setting
31: Low excitation
setting
10: Stop gain,
stop timer setting
22: Manual zero point
adjusting
23: Manual span
adjusting
40: Proportional gain,
integral time
setting
41: Additional gain,
addition dead
zone setting
50:
Contact input
setting for MI1,
MI2, MI3
51: Analog input
setting for AI1, AI2
52: Extension screen
setting
Adjustment/setting
item selection screen
Power-on
54: Pass word
setting
Password
input screen
2:Manual Setting
1:Tension setting
3:Taper rate setting
11: Gain 1,
gain 2 setting
26: Zero tension
detection
When a password setting value is zero (default), the
password input screen is not displayed, and the
adjustment/setting item selection screen is displayed
wen the power is turned ON.
Select an item number using the setting dial(16), and
then press the
T key (screen selection key) to move
to the screen of the selected item.