Mitsubishi LE-30CTN Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 64

background image

1.2 Panel configuration

1. Outline

10

1.2

Panel configuration

[1] Keyin key(1)

Prohibits the operator from changing the set values. - - - - - - - - - - - - - - - - Refer to Sec. 8.2.

[2] Function keys(4)

Used for switching the screen shown on the liquid crystal display. The function of each key depends on
the displayed screen. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Refer to Sec. 3.2.2.

[3] Screen selection keys(6)

Used for switching the screen shown on the liquid crystal display or moving the cursor upward or
downward.

[4] Monitor item selection key(9)

Switches the item to be displayed on the monitor display(7). Pressing this key will switch the monitor item
between "tension (N or

×

10N)". and "output (%)".

[5] Output ON/OFF key(15)

Turns the control output on and off.

[6] Menu selection key(17)

Selects a menu item. Use this key to read out the operation data of the selected menu item.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Refer to Sec. 8.1.

[7] Automatic control mode selection key(12)

Switches the control mode to the automatic control mode. When switched to the automatic control mode,
the tension setting screen will appear on the liquid crystal display, and the AUTO indicator LED(11) will
light. In this mode, you can set the tension value using the setting dial(16).

[8] Manual control mode selection key(13)

Switches the control mode to the manual control mode. When switched to the manual control mode, the
manual setting screen will appear, and the MANUAL LED(10) will light. In this mode, manual operation is
possible.

Using the setting dial(16), the user can control output within the range of 0 to 100%. For the set output of
0 to 100%, the following voltage will be output:
Powder clutch/brake control output (PP - PN) - - - - - - - - - - - - - - - - - - - 0 to Approx. 30 V
Power amplifier and AC servo amplifier control output (TOUT - AOC) - - 0 to 5 V

[9] Power switch

The controller main body has no power switch. For this reason, install a switch that can open and close
all the phases on the power wiring side.

(6)Screen selection keys

(4)Function keys

(5)LCD display

(7)Monitor display

(8)Unit of monitoring item

(9)Monitor item selection key

(12)Automatic control mode key

(11)AUTO indicator LED

(10)MANUAL indicator LED

(13)Manual control mode key

(14)Output ON/OFF LED

(15)Output ON/OFF key

(16)Setting dial

(17)Menu selection key

(1)Keyin key

(3)Power indicator
LED

(2)Keyin LED

Tension monitoring graph

Target tension graph

Set tension value

Set manual output value

Tension monitoring graph

Target tension graph

Shows the target tension value
at automatic control mode.

«
...
10
11
12
13
14
...
»

Содержание LE-30CTN

































































Отзывы:

Нет отзывов

Похожие инструкции для LE-30CTN

Бренд: Warren Controls Страницы: 16

Бренд: Harmonic Drive Страницы: 25

Бренд: Nelson Страницы: 8

Бренд: Jedo Страницы: 26

Бренд: Parker Страницы: 4

Бренд: GADGETMONSTER Страницы: 30

Бренд: Linak Страницы: 33

LMT070DICFWD-NJN

Бренд: Topway Страницы: 34

ibaMS16-DI-220V Series

Бренд: IBA Страницы: 32

Бренд: Phoenix Contact Страницы: 56

Бренд: Sensitron Страницы: 32

Бренд: Wavelength Electronics Страницы: 17

Бренд: Kelly Страницы: 37

Verifi FingerTouch Security

Бренд: Zvetco Biometrics Страницы: 8

AN-X4-ABRIO-HMI

Бренд: QTS Страницы: 48

Бренд: ICC Страницы: 2

Бренд: DROPSA Страницы: 29

Fireball Taurus

Бренд: Escient Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды