Mitsubishi GX Configurator-PT, Руководство пользователя

Страница: 95 / 224

6 - 5 6 - 5
MELSEC-Q
6 UTILITY PACKAGE (GX Configurator-PT)
6.3 Explanation of utility package operations
6.3.1 How to perform common utility package operations
(1) Available control keys
Special keys that can be used during operations of the utility package and their
applications are shown in the table below.
Name of key Application
Esc
Cancels a newly entered value when entering data in a cell.
Closes the window.
Tab
Moves between controls in the window.
Ctrl
Uses together with the mouse when multiple cells are selected
in the Test selected.
Delete
Deletes the character where the cursor is positioned.
When a cell is selected, clears all of the setting contents.
Back
Space
Deletes the character where the cursor is positioned.
Moves the cursor.
Page
Up
Moves the cursor one page up.
Page
Down
Moves the cursor one page down.
Enter
Confirms the value entered in the cell.
(2) Data to be created with the utility package
The data and files shown below that are created with the utility package are also
used by GX Developer operations. Figure 6.1 shows which operation uses which
data or file.
<Intelligent module parameters>
(a) This data is created with the auto refresh setting, and stored in the intelligent
module parameter file of the project to be created using GX Developer.
Project
Program
Parameters
PLC Parameters
Network Parameters
Intelligent Module Parameters
(b) Steps 1) to 3) shown in Figure 6.1 are performed using the following
operations.
1) Operating using GX Developer.
[Project] [Open project] / [Save] / [Save as]
2) Operating on the intelligent module parameter setting module selection
screen of the utility.
[File] [Open file] / [Save file]