Mitsubishi GOT2000Series, Руководство по подключению

Страница: 120 / 338

5 - 20
5. CONNECTION TO FUJI TEMPERATURE CONTROLLER
5.7 Precautions
5.6.1 FUJI PXR/PXG/PXH
*1 Only reading is possible.
5.7 Precautions

Station number settings of temperature controller
In the system configuration, the temperature controller with the station number set with the host address must be
included. For details of host address setting, refer to the following.
5.4.2 Communication detail settings

FIX processing of temperature controller
The temperature controller power must not be turned off during the FIX processing. Otherwise, data within the non-
volatile memory will corrupt and the temperature controller will be unavailable.

GOT clock control
Since the temperature controller does not have a clock function, the settings of "time adjusting" or "time broad cast"
by GOT clock control will be disabled.

Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device. For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.
GT Designer3 (GOT2000) Help
Device name Setting range Device No. representation
Bit
device
Bit data (0) 00001 to 00001
Decimal
Bit data (1)
*1
10001 to 10016
Word device bit Specified bit of the following word devices
―
W
o
rd device
Word data (3)
*1
30001 to 31398
Decimal
Word data (4) 40001 to 43776