Mitsubishi Electric Q66DA-G, Руководство пользователя

Страница: 76 / 190

4
- 17 4.6 Offset/Gain Settings
4
SETUP AND PROCEDURES BEFORE OPERATION
When running this program together with the normal-mode D/A conversion pro-
gram (Refer to Section 6.2.3), use
*1
of this program as the initial setting program.
To utilize each function of the Q66DA-G for D/A conversion in normal mode, add
an appropriate initial setting item to the part marked
*2
. (Refer to an example
below.)
*2 Example of adding initial setting items (Rate control function)
Note) When adding this program to the normal-mode D/A conversion program
(Refer to Section 6.2.3), replace the existing initial setting program with the pro-
gram marked
*1
.
(c) When switching the mode by making intelligent function module switch setting
Only the common program is necessary.
(3) Precautions
Do not perform the following operations of (a), (b), and (c) in the offset/gain setting
mode. (If performed, an error occurs in the flash memory data and the Q66DA-G may
not operate properly.)
(a) Powering the programmable controller CPU.
(b) Resetting the programmable controller CPU.
(c) Performing an online module change.
Rate control
enable/disable setting
CH1 Increase digital
limit value
CH1 Decrease digital
limit value
\
\
\