Mitsubishi Electric Q66DA-G, Руководство пользователя

Страница: 18 / 190

2
- 1 2.1 Applicable Systems
2
SYSTEM CONFIGURATION
2 SYSTEM CONFIGURATION
This chapter explains the system configuration of the Q66DA-G.
2.1 Applicable Systems
This section describes the applicable systems.
(1) Applicable modules and base units, and No. of modules
(a) When mounted with a CPU module
For the applicable modules, the number of modules, and base units applicable to
the Q66DA-G, refer to the user’s manual for the CPU module used.
Note the following when the Q66DA-G is mounted with a CPU module.
• Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient. Pay attention to the
power supply capacity before mounting modules, and if the power supply
capacity is insufficient, change the combination of modules.
• Mount a module within the number of I/O points for the CPU module, If the
number of slots is within the available range, the module can be mounted on
any slot.
Remark
When the module is used with a C Controller module, refer to the user’s manual
for the C Controller module.
(b) Mounting to a MELSECNET/H remote I/O station
For the MELSECNET/H remote I/O station, the number of modules, and base
units applicable to the Q66DA-G, refer to the Q Corresponding MELSECNET/H
Network System Reference Manual (Remote I/O network).
(2) Support of the multiple CPU system
When using the Q66DA-G in a multiple CPU system, refer to the following manual
first.
• QCPU User's Manual (Multiple CPU System)
(3) Support of online module change
The function version of the Q66DA-G has been "C" from the first release, supporting
online module change.
For procedures of the online module change, refer to Chapter7.