Mitsubishi Electric Q66DA-G, Руководство пользователя

Страница: 98 / 190

5
- 22 5.6 Monitoring/Test
5.6.1 Monitor/test screen
5
UTILITY PACKAGE (GX Configurator-DA)
[Explanation of items]
(1) Items
(2) Command buttons
(1) Turning on or off an output enable/disable flag or writing CH Digital value
during test operation changes the analog output, so perform these after
ensuring the safety.
(3) Example of using "Execute test"
The following explains the case of forcing CH1 Output enable/disable flag (Y1) to turn
on.
(a) Click the button in the Monitor/Test screen.
(b) Change the "Y1: CH1 Output enable/disable flag" setting to "ON: enable."
At this point, this setting is not written to the Q66DA-G.
(c) Select the field, of which setting value was changed in step (b).
(When multiple items were changed in (b), select the fields while holding down the
Ctrl key. Multiple fields can be selected by dragging the mouse over them.)
(d) Click the button to write the data.
After the writing is completed, the written values are displayed in the "Current
value" field.
Setting item : Displays buffer memory names.
Current value : Monitors the present buffer memory values.
Setting value
: Enter or select values to be written into the buffer memory
for test operation.
Displays the current value of the item selected.
(This is used to check the text that cannot be dis-
played in the current value field. However, in this
utility package, all items can be displayed in the
display fields.)
Creates a file and writes the screen data in text
file format.
/
Selects whether or not to monitor current values.
Performs a test on the selected items. To select
more than one item, select them while holding down
the key.
Closes the currently open screen and returns to
the previous screen.