Mitsubishi Electric Q66DA-G, Руководство пользователя

Страница: 56 / 190

3
- 33 3.4 Buffer Memory
3.4.12 Warning output flag (Un\G48)
3
SPECIFICATIONS
3.4.12 Warning output flag (Un\G48)
(1) When the digital input value falls outside CH Warning output upper/lower limit value
(Un\G86 to Un\G97) range, the bit corresponding to each channel turns to "1".
(2) Whether the warning is the upper or lower limit value warning can be checked on each
channel.
(3) If the warning is detected on any of the channels enabled for conversion, Warning out-
put signal (XE) turns on.
(4) Turning on Operating condition setting request (Y9) or Warning output clear request
(YE) clears Warning output flag.
(5) Refer to Section 3.2.3 for details of warning output function.
3.4.13 CH [ ] Scaling enable/disable setting (Un\G53)
(1) Set whether to enable or disable the scaling on each channel.
(2) To validate the settings, on/off of Operating condition setting request (Y9) is required.
(Refer to Section 3.3.2.)
(3) The default setting is all-channel scaling disable.
(4) Refer to Section 3.2.5 for details of warning output function.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
1: Warning output
0: Normal
Un\G48
0 0 0 0
CH2 CH2 CH1 CH1 CH4 CH4 CH3 CH3 CH6 CH6 CH5 CH5
b12 to b15 information is fixed at 0
lower
limit
value upper
limit
value lower
limit
value upper
limit
value lower
limit
value upper
limit
value lower
limit
value upper
limit
value lower
limit
value upper
limit
value lower
limit
value upper
limit
value
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
CH
2
CH
1
CH
4
CH
3
CH
6
CH
5
1: Scaling disable
0: Scaling enable
Un\G53 0 0 0 0 0 0 0 0 0 0
b6 to b15 information is fixed at 0