Mitsubishi Electric MELSEC iQ-RX40NC6B, Руководство пользователя приложения

Страница: 216 / 228

214
APPX
Appendix 10 Buffer Memory
■
Buffer memory address
The following table shows the buffer memory addresses of these areas.
Double input discrepancy auto recovery enabled signal
The setting status of "Auto recovery settings after discrepancy error" can be checked in this area. When "Auto recovery
settings after discrepancy error" is set to "Enable", 1 is stored.
■
Buffer memory address
The following table shows the buffer memory address of this area.
Double input discrepancy detection state
The double input discrepancy detection state is stored regardless of the setting of "Auto recovery settings after discrepancy
error". This signal turns on when a double input discrepancy occurs in the relevant input signal pair.
■ Buffer memory address
The following table shows the buffer memory address of this area.
■
Clearing Double input discrepancy detection state
This area will not be cleared even if the double input discrepancy detection state is eliminated. Turn on and off Error clear
request (Y10) to clear this area.
Buffer memory name X00 to X0F
External input monitor signal X00 to X0F (SIL2 mode Main) 1024
External input monitor signal X00 to X0F (SIL2 mode Sub) 1028
"Auto recovery settings after discrepancy error" Stored value
"Disable" 0
"Enable" 1
Buffer memory name X00 to X0F
Double input discrepancy auto recovery enabled signal 1032
(1) 0: No discrepancy occurs, 1: A discrepancy occurs.
Buffer memory name X00 to X0F
Double input discrepancy detection state 1036
X00
(1)
X01 X02 X03 X04 X05 X06 X07 X08 X09 X0A X0B X0C X0D X0E X0F
b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14 b15