manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-RX40NC6B, Руководство пользователя приложения

Mitsubishi Electric MELSEC iQ-RX40NC6B – это высокотехнологичный контроллер, который обеспечивает надежное управление процессами в промышленности. Вы можете скачать бесплатное руководство пользователя "Application User'S Manual" для этого устройства на нашем сайте. manualshive.com. Получите всю необходимую информацию для эффективного использования этого продукта.

Поделиться
Скачать
background image

222

Please confirm the following product warranty details before using this product.

1. Limited Warranty and Product Support.

a. Mitsubishi Electric Company ("MELCO") warrants that for a period of eighteen (18) months after date of delivery from the point of 

manufacture or one year from date of Customer's purchase, whichever is less, Mitsubishi programmable logic controllers (the 
"Products") will be free from defects in material and workmanship.

b. At MELCO's option, for those Products MELCO determines are not as warranted, MELCO shall either repair or replace them or issue 

a credit or return the purchase price paid for them.

c. For this warranty to apply:

(1)  Customer shall give MELCO (i) notice of a warranty claim to MELCO and the authorized dealer or distributor from whom the 

Products were purchased, (ii) the notice shall describe in reasonable details the warranty problem, (iii) the notice shall be 
provided promptly and in no event later than thirty (30) days after the Customer knows or has reason to believe that Products are 
not as warranted, and (iv) in any event, the notice must given within the warranty period;

(2)  Customer shall cooperate with MELCO and MELCO's representatives in MELCO's investigation of the warranty claim, including 

preserving evidence of the claim and its causes, meaningfully responding to MELCO's questions and investigation of the 
problem, grant MELCO access to witnesses, personnel, documents, physical evidence and records concerning the warranty 
problem, and allow MELCO to examine and test the Products in question offsite or at the premises where they are installed or 
used; and

(3)  If MELCO requests, Customer shall remove Products it claims are defective and ship them to MELCO or MELCO's authorized 

representative for examination and, if found defective, for repair or replacement. The costs of removal, shipment to and from 
MELCO's designated examination point, and reinstallation of repaired or replaced Products shall be at Customer's expense.

(4)  If Customer requests and MELCO agrees to effect repairs onsite at any domestic or overseas location, the Customer will pay for 

the costs of sending repair personnel and shipping parts. MELCO is not responsible for any re-commissioning, maintenance, or 
testing on-site that involves repairs or replacing of the Products.

d. Repairs of Products located outside of Japan are accepted by MELCO's local authorized service facility centers ("FA Centers"). 

Terms and conditions on which each FA Center offers repair services for Products that are out of warranty or not covered by 
MELCO's limited warranty may vary.

e. Subject to availability of spare parts, MELCO will offer Product repair services for (7) years after each Product model or line is 

discontinued, at MELCO's or its FA Centers' rates and charges and standard terms in effect at the time of repair. MELCO usually 
produces and retains sufficient spare parts for repairs of its Products for a period of seven (7) years after production is discontinued.

f.  MELCO generally announces discontinuation of Products through MELCO's Technical Bulletins. Products discontinued and repair 

parts for them may not be available after their production is discontinued.

2. Limits of Warranties.

a. MELCO does not warrant or guarantee the design, specify, manufacture, construction or installation of the materials, construction 

criteria, functionality, use, properties or other characteristics of the equipment, systems, or production lines into which the Products 
may be incorporated, including any safety, fail-safe and shut down systems using the Products.

b. MELCO is not responsible for determining the suitability of the Products for their intended purpose and use, including determining if 

the Products provide appropriate safety margins and redundancies for the applications, equipment or systems into which they are 
incorporated.

c. Customer acknowledges that qualified and experienced personnel are required to determine the suitability, application, design, 

construction and proper installation and integration of the Products. MELCO does not supply such personnel.

d. MELCO is not responsible for designing and conducting tests to determine that the Product functions appropriately and meets 

application standards and requirements as installed or incorporated into the end-user's equipment, production lines or systems.

e. MELCO does not warrant any Product:

(1)  repaired or altered by persons other than MELCO or its authorized engineers or FA Centers;
(2)  subjected to negligence, carelessness, accident, misuse, or damage;
(3)  improperly stored, handled, installed or maintained;
(4)  integrated or used in connection with improperly designed, incompatible or defective hardware or software;
(5)  that fails because consumable parts such as batteries, backlights, or fuses were not tested, serviced or replaced;
(6)  operated or used with equipment, production lines or systems that do not meet applicable and commensurate legal, safety and 

industry-accepted standards;

(7)  operated or used in abnormal applications;
(8)  installed, operated or used in contravention of instructions, precautions or warnings contained in MELCO's user, instruction 

and/or safety manuals, technical bulletins and guidelines for the Products;

(9)  used with obsolete technologies or technologies not fully tested and widely accepted and in use at the time of the Product's 

manufacture;

(10) subjected to excessive heat or moisture, abnormal voltages, shock, excessive vibration, physical damage or other improper 

environment; or

(11) damaged or malfunctioning due to Acts of God, fires, acts of vandals, criminals or terrorists, communication or power failures, or 

any other cause or failure that results from circumstances beyond MELCO's control.

f.   All Product information and specifications contained on MELCO's website and in catalogs, manuals, or technical information 

materials provided by MELCO are subject to change without prior notice.

Содержание MELSEC iQ-RX40NC6B





































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MELSEC iQ-RX40NC6B

YASKAWA P1000 Quick Start Manual preview
P1000
Бренд: YASKAWA Страницы: 256
JDS Uniphase SK Series User Manual preview
SK Series
Бренд: JDS Uniphase Страницы: 27
Danfoss EH Series Service Manual preview
EH Series
Бренд: Danfoss Страницы: 20
OEG KMS Manual preview
KMS
Бренд: OEG Страницы: 168
CALEFFI 543 Series Quick Start Manual preview
543 Series
Бренд: CALEFFI Страницы: 2
CALEFFI 5350 Series Manual preview
5350 Series
Бренд: CALEFFI Страницы: 12
Caliber RC20 User Manual preview
RC20
Бренд: Caliber Страницы: 6
VAT 620 Series Installation, Operating, & Maintenance Instructions preview
620 Series
Бренд: VAT Страницы: 26
Lamtec ETAMATIC Manual preview
ETAMATIC
Бренд: Lamtec Страницы: 136
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Бренд: National Instruments Страницы: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Бренд: National Instruments Страницы: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Бренд: National Instruments Страницы: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Бренд: National Instruments Страницы: 24
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Бренд: National Instruments Страницы: 21
National Instruments NI 9242 Getting Started Manual preview
NI 9242
Бренд: National Instruments Страницы: 39
National Instruments NI 9218 Getting Started preview
NI 9218
Бренд: National Instruments Страницы: 22
National Instruments NI 9263 Calibration Procedure preview
NI 9263
Бренд: National Instruments Страницы: 8
National Instruments NI 9425 Getting Started Manual preview
NI 9425
Бренд: National Instruments Страницы: 20

Бренды по названию

Популярные бренды

Загрузить еще бренды