Mitsubishi Electric F930GOT-BWD-E, Руководство пользователя

Страница: 19 / 274

Graphic Operation Terminal F930GOT Introduction 1
1-5
1.3 Format of manual
1.3.1 Contents described in manual
This manual is described in the following format. Use each element of the format for index.
Example:
1.3.2 Abbreviations used in text
The following terms may be abbreviated in the text.
1) MELSEC FX or A Series unit may be abbreviated to "programmable controller" or "PLC".
2) The software kit to create display screens FX-PCS-DU/WIN-E or SW
¨
D5C-GOTRE-PACK
may be abbreviated to "software to create screens" or "screen creation software".
3) A general-purpose personal computer may be abbreviated to "PC"
4) A floppy disk may be abbreviated to "FD". A floppy disk drive may be abbreviated to "FDD".
5) The graphic operation terminal F930 Series may be abbreviated to "GOT".
6) Devices inside the PLC may be abbreviated to "X" (input), "Y" (output), "M" (auxiliary relay),
"S" (state), "T" (timer), "C" (counter) and "D" (data register). Output contacts of X, Y, M, S, T
and C may be called "bit devices".
All of them may be called "devices".
2. Startup
Graphic Operation Terminal F940GOT
MITSUBISHI
1)
Startup 2
2.1 Startup procedure
2-1
n
Important point
2)
2.1.1 GOT setup
3)
4)
1) Section title
Sections 2 to 6 mainly describe operations.
Sect ions 7 to 12 descr ibe the contents
required to create screens.
2) Title
The title explains the contents of each para-
graph.
3) Sub title
4) Important point
Terms used in the text are explained and sup-
plemented.