Mitsubishi Electric F930GOT-BWD-E, Руководство пользователя

Страница: 69 / 274

HPP Mode 4
4-1
4. HPP Mode
In the HPP mode, devices can be monitored, and set values and current values can be
changed from the GOT to the connected PLC.
4.1 Outline of HPP mode
This paragraph describes the operating procedure to change over to the HPP mode and each
function available in the HPP mode.
u u u u
Basic operation
• In the case of computer link connection, monitoring and the set value change range are
restricted. For the details, refer to Section 1.
The SELECT MODE
screen is displayed.
HPP MODE
The HPP MODE
screen is displayed.
Paragraph 2.3
Select "HPP
MODE" on
the screen.
The screen shown
below is displayed.
END [HPP MODE]
[HPP MODE MENU]
DEVICE MONITOR
ACTIVE STATE MONITOR
PC DIAGNOSIS
1)
3)
2)
• Among the following functions, 2) and 3) are valid
only when the FX Series PLC is connected.
1) DEVICE MONITOR (Paragraph 4.2)
The ON/OFF status and the set value/current
value of arbitrary devices in the PLC can be
monitored. In addition, the ON/OFF status can
be forcedly set to ON/OFF and the set values/
current values can be changed.
2) ACTIVE STATE MONITOR (Paragraph 4.3)
The state (S) Nos. in the ON status in the FX
Series PLC are displayed.
3) PC DIAGNOSIS (Paragraph 4.4)
The error information of the FX Series PLC is
displayed.
Graphic Operation Terminal F930GOT