Mitsubishi Electric F930GOT-BWD-E, Руководство пользователя

Страница: 231 / 274

Graphic Operation Terminal F930GOT Creation of Display Screen (SW
o o o o
D5C-GOTRE-PACK) 11
11-31
11.6 Data input function
The ON/OFF status of bit devices and the current value of word devices in the PLC can be dis-
played.
11.6.1 Numerical input function
The data of word devices in the PLC can be displayed in the form of numerics.
u u u u
Contents of setting
1) Number of digits
• Maximum allowable number of digits: 12 (Each of "-" (minus sign) and a decimal point is
counted as one digit.)
Number of digits after decimal point
• Enter the number of digits after a decimal point for a case where a decimal point is dis-
played.
Example: When the displayed numeric is "2000"
2000: Number of digits after decimal point = 0
200.0: Number of digits after decimal point = 1
20.00: Number of digits after decimal point = 2
2.000: Number of digits after decimal point = 3
2) Style
• Select one style among decimal with sign, decimal without sign, hexadecimal, octal,
binary and real.
• Zero suppression
When the zero suppression function is not used, "0" is displayed in each digit position to
the left of the data. The number of "0"
′
s will depend on the specified total number of dig-
its.
Example:
When the total number of digits is set to 7 and the number of digits after decimal point is
set to 2
0012.34
ß
"0" is displayed in these digits.
• A numeric is displayed horizontally.
High-speed counter
-2147483648
C235 (32 bits)
11 digits 10 digits
If data whose number of digits exceeds the maximum allowable
number of digits is specified to be displayed, "?" is displayed.
to
-2147483648