Mitsubishi Electric City Multi CMH-WM250V-A, Руководство по обслуживанию

Страница: 356 / 436

[8-13 Parts Replacement Instructions ]
BS_08_E chapter 8 -
101
8 Troub
le
sho
oting Bas
ed on Ob
ser
ved
Sy
mp
toms
[Drain pan mounting procedure]
*Reuse the drain pan mounting screws that were removed from the replaced drain pan. (M5 x 16 mm with a nylon washer)
(1) Screw down the right drain pan with two screws. (See Figure 7.)
(2) Screw down the left drain pan with two screws. (See Figure 8.)
(3) Hook the pipe cover on the left drain pan. (See Figure 9.)
(4) Hold the external temperature sensor wiring to the left drain pan with two cable ties. (See Figure 10.)
(5) Screw down the front panel. (See Figure 11.)
Figure 7
Figure 8
Figure 9
Two screws
Two screws
Drain pan (right)
Drain pan (left)
Cable tie
Outside temperature sensor wiring
Drain pan (left)
Front panel
Pipe cover
Figure 10
Figure 11
Insert the tab on the drain pan into
the notch on the center pillar, and
screw down the drain pan.
Hook the left drain pan on the
protruded part on the right drain pan.
Hook the pipe cover
on the drain pan.
0000004986.BOOK 101 ページ ２０１９年５月９日 木曜日 午後６時２２分