Mitsubishi Electric City Multi CMH-WM250V-A, Руководство по обслуживанию

Страница: 59 / 436

[2-8 Example System with an ME Remote Controller ]
BS_02_E 22
- chapter 2
2
Rest
rict
io
ns
(4) Wiring method
1) Indoor/outdoor transmission line
Same as 2-7-1
Shielded cable connection
Same as 2-7-1
2) Transmission line for centralized control
Same as 2-7-4
Shielded cable connection
Same as 2-7-4
3) ME remote controller wiring
ME remote controller is connectable anywhere on the in-
door-outdoor transmission line.
When 2 remote controllers are connected to the sys-
tem
Refer to the section on Switch Setting.
Performing a group operation (including the group
operation of units in different refrigerant circuits).
Refer to the section on Switch Setting.
4) LOSSNAY connection
Same as 2-7-4
5) Switch setting
Address setting is required as follows.
(5) Address setting method
Proce-
dures
Unit or controller
Address setting
range
Setting method Notes
Factory
setting
1 Indoor
unit Main unit IC 01 to 50 Assign the smallest ad-
dress to the main unit in
the group. To perform a group
operation of indoor
units that have differ-
ent functions, desig-
nate the indoor unit in
the group with the
greatest number of
functions as the main
unit. 00
Sub unit Assign sequential num-
bers starting with the ad-
dress of the main unit in
the same group +1.
(Main unit a1,
main unit a2,
main unit a3,
etc.)
2 LOSSNAY LC 01 to 50 Assign an arbitrary but
unique address to each
of these units after as-
signing an address to all
indoor units. None of these ad-
dresses may overlap
any of the indoor unit
addresses. 00
3 ME re-
mote
controller Main
remote
controller RC 101 to 150 Add 100 to the main unit
address in the group

It is not necessary to
set the 100s digit.

To set the address
to 200, set the rota-
ry switches to 00.
101
Sub
remote
controller RC 151 to 200 Add 150 to the main unit
address in the group
4 Outdoor unit OC 51 to 99 Assign the smallest ad-
dress to the outdoor unit
(OC) in the same refrig-
erant circuit. To set the address to
100, set the rotary
switches to 50.
If the address as-
signed to the hydro
unit overlaps any of
the addresses as-
signed to the outdoor
units, use a different,
unused address in the
specified setting
range. 00
5 Auxiliary
outdoor
unit Hydro unit HU 52 to 100 Assign an address that
equals the "address of
the outdoor unit in the
same refrigerant circuit
plus 1" to the unit. 00
0000004972.BOOK 22 ページ ２０１９年５月８日 水曜日 午後２時４８分