Mitsubishi Electric City Multi CMH-WM250V-A, Руководство по обслуживанию

Страница: 367 / 436

[8-13 Parts Replacement Instructions ]
112
- chapter 8 BS_08_E
8 Troub
le
sho
oting Bas
ed on Ob
ser
ved
Sy
mp
toms
3. XL-module
(1) Remove the two front panels from the unit by unscrewing the 14 screws. (See Figure 2.)
(2) Remove the fin guard by unscrewing the 12 screws. (See Figure 2.)
(3) Remove pipe cover. (See Figure 3.)
(4) Remove the left drain pan by unscrewing the two screws and cutting the two cable ties. (See Figure 3.)
(5) Remove the right drain pan by unscrewing the 2 screws. (See Figure 3.)
(6) Remove the 3 cable straps from the center pillar. (See Figure 4.)
(7) Remove the 3 cable straps holding motor wiring from the control box. (See Figure 5.)
(8) Remove the fan guard by unscrewing the 12 screws. (See Figure 6.)
(9) Remove the wire from the center frame. (See Figure 7.)
(10) Remove the motor ASSY by unscrewing the 8 screws, using caution not to damage the motor wiring or the fan. (See
Figure 7.)
Fin guard Center pillar
Front panel
Figure 2
Figure 3
Pipe cover
Drain pan (left)
Drain pan (right)
Center frame
Fan
Fan
Left rear heat exchanger
Right rear heat exchanger
Front heat exchanger
Figure 1
Front of the unit
Figure 4
Figure 5
Figure 7
Motor ASSY
Motor ASSY
Fan guard
Figure 6
Motor cable strap
Motor cable strap
Cable strap for holding
strong electrical wiring
Cable strap for holding
weak electrical wiring
Compressor
cable strap
0000004986.BOOK 112 ページ ２０１９年５月９日 木曜日 午後６時２２分