Mitsubishi Electric City Multi CMH-WM250V-A, Руководство по обслуживанию

Страница: 329 / 436

[8-13 Parts Replacement Instructions ]
74
- chapter 8 BS_08_E
8 Troub
le
sho
oting Bas
ed on Ob
ser
ved
Sy
mp
toms
3. XL-module
Take the following procedures to ensure sufficient maintenance space and good visibility.
(1) Remove the front panel from the unit by unscrewing the 14 screws. (See Figure 1.)
(2) Remove the external temperature sensor wiring from the left drain pan by cutting the two cable ties.
Unhook the pipe cover from the left drain pan. (See Figure 3.)
(3) Remove the left drain pan by unscrewing the two screws. (See Figure 4.)
(4) Remove the right drain pan by unscrewing the two screws. (See Figure 5.)
(5) Remove the three cable straps from the center pillar. (See Figure 6.)
(6) Remove the right and left fin guards and the center pillar by unscrewing the 18 screws. (See Figure 7.)
Figure 6
Front panel
Drain pan (left) Drain pan (right)
Cable tie
Two screws
Pipe cover
Outside temperature sensor wiring
Drain pan (left)
Figure 2 Figure 1
Figure 4 Figure 3
Two screws
Figure 5
Drain pan (left)
Drain pan (right)
Pipe cover
Fin guard
Figure 7 Center pillar
Unhook the pipe cover
from the drain pan.
Unhook the left drain pan
from the right drain pan.
Unhook the right drain pan
from the center pillar.
0000004986.BOOK 74 ページ ２０１９年５月９日 木曜日 午後６時２２分