Mitel Inter-Tel Axxess Скачать руководство пользователя страница 165 | Manualshive

Страница: 165 / 384

Mitel Inter-Tel Axxess Скачать руководство пользователя страница 165

Page 149

ACD Hunt Groups Span Nodes

System Features

Inter-Tel

®

Axxess

®

Administrator Guide — Issue 11.0,

May 2008

ACD HUNT GROUPS SPAN NODES

There is a premium feature license called Remote Automatic Call Distribution Hunt Groups. It
allows ACD hunt groups to span nodes. Node-spanning ACD hunt groups can have either
members or ACD Agent IDs.

•

Members:

ACD hunt group members may include off-node endpoints, off-node single

lines, and Hunt Group Member extension lists.

•

ACD Agent IDs:

Unlike members, there are no off-node Agent IDs. Agent IDs are

considered global throughout all nodes in which the Agent exists. This means that if
you create Agent ID 100 on one node, you must also create Agent ID 100 on all other
nodes that have a station that a user may want to login to the hunt group using that ID.

The Remote Automatic Call Distribution Hunt Groups premium feature must be included in
the software license where the hunt group resides as well as any node that wants to have users
login to the node-spanning hunt group. The ACD Hunt Groups premium feature license is also
required. Because of this fact, there are several cases that must be considered. The following
table shows the different displays and results for logging into and out of ACD hunt groups with
the different combinations of the premium feature and the ACD Hunt Group enabled/disabled.

Table 22.

ACD Hunt Group Display/Result Combinations

STA-

TION

NODE

HUNT

GROUP

NODE

LOGIN DISPLAY

LOGIN RESULT

LOGIN “ALL”

DISPLAY

LOGIN “ALL”

RESULT

Yes

Yes

AGENT LOGGED
INTO HUNT GROUP
XXXX

Agent logged into
hunt group.

AGENT LOGGED
INTO ALL ACDS

Agent logged into all
local and remote
groups.

Yes

No

CANNOT ACCESS
RESERVED FEA-
TURE

Agent not logged
into group.

AGENT LOGGED
INTO ALL ACDS

Agent logged into all
local hunt groups,
but not remote where
feature disabled.

No

Yes

CANNOT ACCESS
RESERVED FEA-
TURE

Agent not logged
into group.

AGENT LOGGED
INTO ALL ACDS

Agent logged into all
local, but no remote
groups.

No

No

CANNOT ACCESS
RESERVED FEA-
TURE

Agent not logged
into group.

AGENT LOGGED
INTO ALL ACDS

Agent logged into all
local, but no remote
groups.

«
...
163
164
165
166
167
...
»

Содержание Inter-Tel Axxess

































































































































































































































































































































































































Отзывы:

Нет отзывов