manualshive.com logo in svg

Mitel Inter-Tel Axxess, Руководство администратора

Поделиться
Скачать
Mitel Inter-Tel Axxess Скачать руководство пользователя страница 107

Page 91

System Hardware

Inter-Tel

® 

Axxess

® 

Administrator Guide — Issue 11.0, May 2008

“Send Alert Burst To Headset” Station Flag

To disconnect the headset from a Model 8560 or 8520:

1. 

Unplug the headset cord from the back of the endpoint. 

2. 

While on-hook, enter the Headset Off feature code (316) or the Headset On/Off feature
code (317). The display shows HEADSET MODE OFF.

To disconnect the headset from all other Inter-Tel Endpoints:

1. 

Unplug the headset cord from the base of the endpoint. 

2. 

Plug the coiled handset cord into the base of the endpoint.

3. 

While on-hook, enter the Headset Off feature code (316) or the Headset On/Off feature
code (317). The display shows HEADSET MODE OFF.

“Send Alert Burst To Headset” Station Flag

The “Send Alert Burst To Headset” will send a single tone to a headset, instead of normal end-
point ring tones, when a call is ringing at the station (non-handsfree intercom call, outside call,
queue callback, or reminder message). The tone is sent only once, when the call is received,
and will not repeat even if the call continues to ring unanswered. It is intended as a “wake up”
tone for headsets that have a power-saving function that allows the device to “sleep” if idle for
a set period. The flag is programmed on a station-by-station basis. By default the flag is dis-
abled.

Digital Endpoint Data Port Modules

There are two types of Data Port Modules that can be connected to Model 8560, Model 8520,
Executive Display, Professional Display, Standard Display, and Associate Display endpoints: 

•

PC Data Port Module (PCDPM): 

This is a digital device that is connected to the

Model 8560, Model 8520, Executive Display, Professional Display, Standard Display,
or Associate Display endpoint which supports data transmission between the endpoint
and the system for DSS/BLF, off-hook voice announce (OHVA), Desktop Interface,
and/or serial port functions. A PCDPM is required if a Modem Data Port Module or
DSS/BLF Unit will be installed, or if the user wishes to receive OHVA calls.

NOTE: 

An endpoint serial port should not be used as the voice processing system

communications port.

•

Modem Data Port Module (MDPM): 

The MDPM is an analog device that can be

used with a PCDPM and connected to a modem for data applications or it can be con-
nected to a single-line set. The port itself has an individual extension number and com-
plete station programming setup including its own trunk access and toll restriction
information. (See 

page 92

 for data device information.)

Special programming is required to enable the endpoint circuit to support some of the PCDPM
and MDPM functions.

Station users can adjust the bit rate (bps) of the serial port on the PCDPM connected to the
endpoint, if it is not configured for a DSS/BLF unit. The rate can be set to 300, 600, 1200,
2400, or 4800 (1200, 2400, or 4800 if it is a system serial port). 

Содержание Inter-Tel Axxess

































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды